Wireless Telemetry Scada Products ISM VHF UHF

RFScada32
Finally available, the RFScada32 is in stock and shipping now!. This is a very high performance, highly integrated general purpose RTU with on board data logger. It is a fourth generation (4G) device in the RFScada product family. Primarily designed to interface with the Data Delivery Devices range of RFScada products it is also capable of acquiring data from virtually any third party device that supports an analog, digital, pulse or Modbus connection (hardwired or wireless). Acquired data may be stored using removable data cards and/or transmitted to other remote devices using the Modbus and RFScada protocols. The on board or remote display allows easy data display and control entry for all acquired signals. The RFScada32 may be configured using the keypad and LCD, a PC either locally (via built in USB, RS-232 or RS-485 ports, all optically isolated), remotely using a serial link or radio connection, or using the SD card interface to store or load configurations. There is a built in interface to accommodate a 1 Watt 900 MHz spread spectrum radio module; it may also use any commercial radio modem connected via a second set of RS-232 and RS-485 ports (both optically isolated). All analog signals are acquired, processed and output at a minimum resolution of 16 bits and Modbus support includes acquiring 32 bit resolution data from other devices. There are 32 inputs on the board, each may be configured as analog 4-20mA, 0-10VDC, 0 to 5VDC, digital (dry contact / switch) or pulse. The eight 4-20mA analog outputs may be driven by any local or remote signal source, and the flexible scaling scheme covers virtually any field application. Nine relays on the board may be driven by any source, so for example tank control with adjustable hysteresis or control of oilfield pumps dependant of well pressure may easily be configured. An optional relay board adds another 24 relays, all may be configured in a similar way. The most powerful RFScada device






RFScada 4ADI-5DO2: This model replaces the 4ADI-5DO with many new features and functions. This unit is perfect for most applications, supporting 4 analog, digital or pulse inputs plus an additional 4 digital inputs, 5 relay outputs and all the licensed and unlicensed radio options. Compatible with all models, configurable to route any input to any output plus many extra features. Modbus monitoring and control capability, two RS-232 and two RS-485 ports standard, it even has common control routines built in to eliminate external control logic. Pre-packaged solution with an internal or external antenna, in a NEMA 4X enclosure ready for installation. Your choice of radio options - may operate with any of the licensed or unlicensed radios. Just add a liquid level transducer or float switch to two 4ADI-5DO2 units and you have a complete tank level control system - no PLC or other logic required!
RFScada 4ADI-5DO: The workhorse of the RFScada family. This mid range unit is perfect for most applications, supporting 4 analog as well as 4 digital inputs, 5 relay outputs and all the licensed and unlicensed radio options. Compatible with all models, configurable to route any input to any output plus many extra features. Modbus monitoring and control capability, RS-232 and RS-485 ports standard, it even has common control routines built in to eliminate external control logic. Pre-packaged solution with an internal or external antenna, in a NEMA 4X enclosure ready for installation. Your choice of radio options - may operate with any of the licensed or unlicensed radios. This unit is supported and still available but not recommended for new design; replace with the 4ADI-5DO2.

RFScada 2DI-4DO: Wireless bi-directional telemetry system transmits the state of dual digital inputs to dual relay outputs between units. Each unit has additional dual relay outputs indicating remote AC power sense and bi-directional communications state, for positive verification of correct operation at both units. Perfect for small well systems, pumps / tanks, access control etc. where reliability is of utmost importance. Pre-packaged solution comes with an internal antenna in a NEMA 4X enclosure ready for installation. This unit is supported and still available but not recommended for new design; replace with the 4ADI-5DO2.

RFScada Accessories: Antennas, cables, option boards and other accessories for RFScada devices

Communication receiver control and logging software allows automated PC control of Icom, OptoElectronics, AOR, Radio Shack, Uniden and other receivers / scanners.

Data Delivery Devices LLC 3996 Wright Road Bartlesville OK 74006
Tel. 918-335-3318 FAX 918-398-9990
Email info@datadeliverydevices.com